[Q17-Q37] Get 100% Passing Success With True FCP_FGT_AD-7.6 Exam! [Oct-2025]

Get 100% Passing Success With True FCP_FGT_AD-7.6 Exam! [Oct-2025]

Fortinet FCP_FGT_AD-7.6 PDF Questions - Exceptional Practice To FCP - FortiGate 7.6 Administrator

Fortinet FCP_FGT_AD-7.6 Exam Syllabus Topics:

Topic	Details
Topic 1	Deployment and system configuration: This section of the exam measures the skills of network security engineers and covers essential tasks for setting up a FortiGate device in a production environment. Candidates are expected to perform the initial configuration, establish basic connectivity, and integrate the device within the Fortinet Security Fabric. They must also be able to configure a FortiGate Cluster Protocol (FGCP) high availability setup and troubleshoot resource and connectivity issues to ensure system readiness and network uptime.
Topic 2	VPN: This section of the exam measures the skills of network security engineers and covers the configuration and deployment of Virtual Private Network (VPN) solutions. Candidates are required to implement SSL VPNs to grant secure remote access to internal resources and configure IPsec VPNs in either meshed or partially redundant topologies to ensure encrypted communication between distributed network locations.
Topic 3	Routing: This section of the exam measures the skills of firewall administrators and covers the configuration of routing features on FortiGate devices. It includes defining and applying static routes for directing traffic within and outside the network, as well as setting up Software-Defined WAN (SD-WAN) to distribute and balance traffic loads across multiple WAN connections efficiently.
Topic 4	Content inspection: This section of the exam measures the skills of network security engineers and covers the setup and management of content inspection features on FortiGate. Candidates must demonstrate an understanding of encrypted traffic inspection using digital certificates, identify and apply FortiGate inspection modes, and configure web filtering policies. The ability to implement application control for monitoring and regulating network application usage, configure antivirus profiles to detect and block malware, and set up Intrusion Prevention Systems (IPS) to shield the network from threats and vulnerabilities is also assessed.
Topic 5	Firewall policies and authentication: This section of the exam measures the skills of firewall administrators and covers the implementation and management of security policies. It involves configuring basic and advanced firewall rules, applying Source NAT (SNAT) and Destination NAT (DNAT) options, and enforcing various firewall authentication methods. The section also includes deploying and configuring Fortinet Single Sign-On (FSSO) to streamline user access across the network.

 

NEW QUESTION # 17
Refer to the exhibits.

An administrator wants to add HQ-ISFW-2 in the Security Fabric. HQ-ISFW-2 is in the same subnet as HQ-ISFW. After configuring the Security Fabric settings on HQ-ISFW-2, the status stays Pending.
What can be the two possible reasons? (Choose two.)

• A. Upstream FortiGate IP must be set to 10.0.11.254.
• B. HQ-ISFW-2 must be authorized on HQ-ISFW.
• C. SAML Single Sign-On must be set to Manual.
• D. Management IP must be set to 10.0.13.254.

Answer: A,B

Explanation:
The Upstream FortiGate IP should match the IP address of the Fabric Root interface, which is 10.0.11.254, not 10.0.13.254.
The new device (HQ-ISFW-2) must be authorized on the Fabric Root (HQ-ISFW) before it can join the Security Fabric, otherwise the status remains pending.

NEW QUESTION # 18
Refer to the exhibit.

An administrator has configured an Application Overrides for the ABC.Com application signature and set the Action to Allow. This application control profile is then applied to a firewall policy that is scanning all outbound traffic. Logging is enabled in the firewall policy. To test the configuration, the administrator accessed the ABC.Com web site several times.
Why are there no logs generated under security logs for ABC.Com?

• A. The ABC.Com is configured under application profile, which must be configured as a web filter profile.
• B. The ABC.Com Action is set to Allow.
• C. The ABC.Com is hitting the category Excessive-Bandwidth.
• D. The ABC.Com Type is set as Application instead of Filter.

Answer: B

Explanation:
When the action is set to Allow in an application override, traffic matching this override is allowed without generating security logs because it bypasses deeper inspection and blocking.

NEW QUESTION # 19
Refer to the exhibit.

As an administrator you have created an IPS profile, but it is not performing as expected. While testing you got the output as shown in the exhibit.
What could be the possible reason of the diagnose output shown in the exhibit?

• A. Administrator entered the command diagnose test application ipsmonitor 99.
• B. Administrator entered the command diagnose test application ipsmonitor 5.
• C. FortiGate entered into IPS fail open state.
• D. There is a no firewall policy configured with an IPS security profile.

Answer: D

Explanation:
The output shows the IPS engine count as 0, indicating no active IPS engines are running. This typically means no firewall policy is referencing the IPS security profile, so the IPS profile is not being applied or triggered.

NEW QUESTION # 20
Refer to the exhibit.

Based on this partial configuration, what are the two possible outcomes when FortiGate enters conserve mode? (Choose two.)

• A. Administrators cannot change the configuration.
• B. FortiGate skips quarantine actions.
• C. FortiGate drops new sessions requiring inspection.
• D. Administrators must restart FortiGate to allow new session.

Answer: B,C

Explanation:
In fail-open mode, FortiGate skips quarantine actions to maintain traffic flow despite IPS or antivirus failures.
FortiGate drops new sessions that require inspection when in conserve mode and fail-open is enabled, to protect the network from potentially harmful traffic.

NEW QUESTION # 21
A remote user reports slow SSL VPN performance and frequent disconnections. The user is located in an area with poor internet connectivity.
What setting should the administrator adjust to improve the user's experience?

• A. Change the SSL VPN port to a non-standard port.
• B. Configure the DTLS timeout to accommodate high-latency connections.
• C. Enable split tunneling to reduce VPN traffic.
• D. Increase the session timeout for inactive sessions.

Answer: B

Explanation:
Adjusting the DTLS timeout helps maintain SSL VPN stability and performance in environments with poor or high-latency internet connectivity by allowing more time for packet retransmissions before dropping the connection.

NEW QUESTION # 22
Refer to the exhibits.

An administrator has observed the performance status outputs on an HA cluster for 55 seconds.
Which FortiGate is the primary?

• A. HQ-NGFW-1 with the parameter override setting
• B. HQ-NGFW-2 with the parameter priority setting
• C. HQ-NGFW-1 with the parameter memory-failover-flip-timeout setting
• D. HQ-NGFW-2 with the parameter memory-failover-threshold setting

Answer: A

Explanation:
The HA configuration shows that override is disabled (set override disable), but despite this, HQ-NGFW-1 has the higher priority (200) and is acting as the primary, as indicated by its higher resource usage and uptime. Override allows the device with higher priority to take over as primary, so HQ-NGFW-1 is the primary device.

NEW QUESTION # 23
You have created a web filter profile named restrict_media-profile with a daily category usage quota.
When you are adding the profile to the firewall policy, the restrict_media-profile is not listed in the available web profile drop down.
What could be the reason?

• A. The inspection mode in the firewall policy is not matching with web filter profile feature set.
• B. The naming convention used in the web filter profile is restricting it in the firewall policy.
• C. The firewall policy is in no-inspection mode instead of deep-inspection.
• D. The web filter profile is already referenced in another firewall policy.

Answer: A

Explanation:
Web filter profiles with category usage quotas require the firewall policy to be in proxy-based (deep) inspection mode; if the inspection mode does not match this requirement, the profile will not appear in the drop-down list.

NEW QUESTION # 24
You have configured an application control profile, set peer-to-peer traffic to Block under the Categories tab, and applied it to the firewall policy. However, your peer-to-peer traffic on known ports is passing through the FortiGate without being blocked.
What FortiGate settings should you check to resolve this issue?

• A. FortiGuard category ratings
• B. Replacement Messages for UDP-based Applications
• C. Application and Filter Overrides
• D. Network Protocol Enforcement

Answer: D

Explanation:
Network Protocol Enforcement settings control how FortiGate inspects and enforces protocols on traffic, including peer-to-peer applications on known ports. If not properly enabled, peer-to-peer traffic may bypass blocking despite the application control profile.

NEW QUESTION # 25
Which two statements describe characteristics of automation stitches? (Choose two.)

• A. An automation stitch can have multiple triggers.
• B. Multiple actions can run in parallel.
• C. Actions involve only devices included in the Security Fabric.
• D. Triggers can involve external connectors.

Answer: B,D

Explanation:
Automation stitches can execute multiple actions concurrently (in parallel).
Triggers for automation stitches can come from external connectors beyond just Fortinet devices.

NEW QUESTION # 26
Which three statements about SD-WAN performance SLAs are true? (Choose three.)

• A. They rely on session loss and jitter.
• B. All the SLAtargets can be configured.
• C. They monitor the state of the FortiGate device.
• D. They can be measured actively or passively.
• E. They are applied in a SD-WAN rule lowest cost strategy.

Answer: A,B,D

Explanation:
SD-WAN SLAs monitor metrics like packet loss and jitter to evaluate link performance.
SLA measurements can be performed using active probing or passive monitoring.
Administrators can configure all SLA target parameters to define performance criteria.

NEW QUESTION # 27
An administrator wants to configure dead peer detection (DPD) on IPsec VPN for detecting dead tunnels. The requirement is that FortiGate sends DPD probes only when there is no inbound traffic.
Which DPD mode on FortiGate meets this requirement?

• A. Enabled
• B. Disabled
• C. On Idle
• D. On Demand

Answer: A

Explanation:
The "On Idle" DPD mode configures FortiGate to send DPD probes only when no inbound traffic is detected, meeting the requirement to send probes only when the tunnel is idle.

NEW QUESTION # 28
Refer to the exhibits.

The exhibits show a diagram of a FortiGate device connected to the network, and the firewall configuration.
An administrator created a Deny policy with default settings to deny Webserver access for Remote-User2.
The policy should work such that Remote-User1 must be able to access the Webserver while preventing Remote-User2 from accessing the Webserver.
Which additional configuration can the administrator add to a deny firewall policy, beyond the default behavior, to block Remote-User2 from accessing the Webserver?

• A. Set the Destination address as Deny_IP in the Allow_access policy.
• B. Configure a One-to-One IP Pool object in a new policy.
• C. Set the Destination address as Webserver in the Deny policy.
• D. Disable match-vip in the Allow_access policy

Answer: C

Explanation:
To block Remote-User2's access to the Webserver, the deny policy must explicitly specify the Webserver as the destination address; otherwise, it denies traffic to all destinations, which is not the desired behavior.

NEW QUESTION # 29
Refer to the exhibit.

The exhibit shows the FortiGuard Category Based Filter section of a corporate web filter profile.
An administrator must block access to download.com, which belongs to the Freeware and Software Downloads category. The administrator must also allow other websites in the same category.
What are two solutions for satisfying the requirement? (Choose two.)

• A. Set the Freeware and Software Downloads category Action to Warning.
• B. Configure a static URL filter entry for download.com with Type and Action set to Wildcard and Block, respectively.
• C. Configure a separate firewall policy with action Deny and an FQDN address object for*.download.com as destination address.
• D. Configure a web override rating for download.com and select Malicious Websites as the subcategory.

Answer: B,C

Explanation:
Creating a static URL filter to block download.com specifically allows blocking that site without affecting the entire category.
Using a separate firewall policy with a Deny action for an FQDN address object matching download.com can also block the site while allowing others in the same category.

NEW QUESTION # 30
A new administrator is configuring FSSO authentication on FortiGate using DC Agent Mode.
Which step is NOT part of the expected process?

• A. FortiGate determines user identity based on the IP address in the FSSO list.
• B. The DC agent sends login event data directly to FortiGate.
• C. The collector agent forwards login event data to FortiGate.
• D. The user logs into the windows domain.

Answer: C

Explanation:
In DC Agent Mode, the DC agent sends login event data directly to FortiGate without involving a collector agent.

NEW QUESTION # 31
Refer to the exhibits.

The exhibits show a diagram of a FortiGate device connected to the network, as well as the IP pool configuration and firewall policy objects.
The WAN (port2) interface has the IP address 100.65.0.101/24.
The LAN (port4) interface has the IP address 10.0.11.254/24.
Which IP address will be used to source NAT (SNAT) the traffic, if the user on HQ-PC-1 (10.0.11.50) pings the IP address of BR-FGT (100.65.1.111)

• A. 100.65.0.99
• B. 100.65.0.149
• C. 100.65.0.49
• D. 100.65.0.101

Answer: A

Explanation:
The ping traffic policy uses the IP pool named SNAT-Remote1, which has the external IP range 100.65.0.99. Therefore, traffic matching this policy (ping from HQ-PC-1 to BR1-FGT) will use 100.65.0.99 for source NAT.

NEW QUESTION # 32
Refer to the exhibit, which shows an SD-WAN zone configuration on the FortiGate GUI.

Based on the exhibit, which statement is true?

• A. The Underlay zone is the zone by default.
• B. port2 and port3 are not assigned to a zone.
• C. The Underlay zone contains no member.
• D. The virtual-wan-link and overlay zones can be deleted.

Answer: A

Explanation:
The Underlay zone is the default SD-WAN zone, typically representing the physical interfaces in the SD-WAN configuration before overlay or virtual links are added.

NEW QUESTION # 33
Refer to the exhibit.

The NOC team connects to the FortiGate GUI with the NOC_Access admin profile. They request that their GUI sessions do not disconnect too early during inactivity.
What must the administrator configure to answer this specific request from the NOC team?

• A. Move NOC_Access to the top of the list to ensure all profile settings take effect.
• B. Increase the offline value of the Override Idle Timeout parameter in the NOC_Access admin profile.
• C. Increase the admintimeout value under config system accprofile NOC_Access.
• D. Ensure that all NOC_Access users are assigned the super_admin role to guarantee access

Answer: C

Explanation:
The admintimeout setting in the admin access profile controls the inactivity timeout for GUI sessions. Increasing this value will extend the session duration before automatic disconnection.

NEW QUESTION # 34
Refer to the exhibits.

The exhibits show the system performance output and default configuration of high memory usage thresholds on a FortiGate device.
Based on the system performance output, what are the two possible outcomes? (Choose two.)

• A. Administrators can access FortiGate only through the console port.
• B. Administrators can change the configuration.
• C. FortiGate drops new sessions.
• D. FortiGate has entered conserve mode.

Answer: B,C

Explanation:
Since memory usage is at 90%, exceeding the red threshold (88%), FortiGate enters a state where configuration changes are still allowed.
In this state, FortiGate drops new sessions to preserve resources and maintain stability.

NEW QUESTION # 35
......

FCP_FGT_AD-7.6 dumps - PrepAwayETE - 100% Passing Guarantee: https://www.prepawayete.com/Fortinet/FCP_FGT_AD-7.6-practice-exam-dumps.html

Fast, Hands-On FCP_FGT_AD-7.6 exam: https://drive.google.com/open?id=1-wnsVqjEUEF6sGKBoHfgKCLSz3_dq4Dp