New 2025 HPE0-S59 Dumps for HPE Technical Certified Exam Questions and Answer
Realistic Verified HPE0-S59 exam dumps Q&As - HPE0-S59 Free Update
NEW QUESTION # 10
Put the steps of the HPE infosight flow in the correct order.
Answer:
Explanation:
Explanation:
(observing, learning, predicting, recommending, acting)
* Observing: The first step involves collecting and monitoring data from the infrastructure. HPE InfoSight continuously gathers telemetry data from various components, including storage, compute, and networking devices.
* Learning: In this step, the collected data is analyzed to identify patterns and trends. Machine learning algorithms process the data to understand the normal behavior of the system and detect anomalies.
* Predicting: Based on the learned patterns, HPE InfoSight can predict potential issues before they occur.
This predictive analysis helps in identifying areas that might cause problems in the future.
* Recommending: After predicting potential issues, HPE InfoSight provides actionable recommendations to prevent or resolve these issues. These recommendations are based on best practices and the vast amount of data analyzed by InfoSight.
* Acting: Finally, the recommendations are implemented to optimize the performance and reliability of the infrastructure. This step may involve configuring settings, applying updates, or other actions to maintain the health of the system.
NEW QUESTION # 11
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
- B. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
- C. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
- D. The customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.
Answer: C
NEW QUESTION # 12
Which statement about an HPE Oneview support dump is true?
- A. Appliance support dump by default contains a logical enclosure support dump
- B. Preview support dump is available only when creating an appliance support dump
- C. Support dump is a binary file that can be opened only in a dedicated application
- D. Support dump can be created if HPE Virtual Connect modules are installed in the frame
Answer: C
NEW QUESTION # 13
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has the appropriate storage controller installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that the compute nodes cannot access the storage module.
What will you verify first when troubleshooting this problem?
- A. If the SAS logical interconnect is a part of the logical enclosure and has a healthy state.
- B. If the D3940 storage module is properly licensed through the HPE OneView interface.
- C. If there is at least one iSCSI network configured that will provide access to the module.
- D. If the D3940 module is imported in a managed state that allows volume provisioning.
Answer: A
NEW QUESTION # 14
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
- B. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
- C. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
- D. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
Answer: A
NEW QUESTION # 15
Which statement about manual orchestration during the firmware update is true?
- A. It provides the ability to install an older firmware version than currently Installed In the interconnect
- B. It provides an ability to select and update one side of the Interconnect topology at a time
- C. It is supported only for logical enclosures with at least three frames
- D. It allows all the interconnect modules to be activated manually at the same time.
Answer: B
Explanation:
Manual orchestration during a firmware update allows administrators to control the update process more precisely. Specifically, it enables the selection and update of one side of the interconnect topology at a time.
This capability is particularly useful in maintaining network availabilityand minimizing downtime during the update process, as one side can be updated and verified before proceeding to the other side.
NEW QUESTION # 16
Click the area within the iLO management interface that will allow you to access workload Advisor.
Answer:
Explanation:
NEW QUESTION # 17
Which statement about HPE Superdome Flex 280 is true?
- A. It can support up to two nPars with an external RMC.
- B. It must be equipped with at least 768 GB of memory.
- C. It supports 2 to 8 sockets in 2-socket increments.
- D. it cannot be managed using HPE OneView.
Answer: C
NEW QUESTION # 18
Your customer has me following HPE Synergy setup
- Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosure
- Two HPE Virtual Connect SE 100Gb F32 Module for Synergy
- Four HPE Synergy 50Gb interconnect Link Module
- Six HPE Synergy Virtual Connect SE 32Gb FC Modules
The customer needs to add a frame.
Which statement about the expansion of this setup is true?
- A. The customer can grow the existing logical enclosure up to 5 frames
- B. The additional frame cannot have 12Gb SAS connection modules installed
- C. The customer has to create a new logical enclosure for the additional frame
- D. The additional frame must have HPE Virtual Connect FC modules installed
Answer: A
Explanation:
HPE Synergy allows scaling of logical enclosures up to 5 frames. Given the current setup of three frames fully populated with HPE Synergy 480 Gen10 Plus modules and other specified components, the customer can add another frame to the existing logical enclosure. This flexibility in scaling ensures that the logical enclosure can be expanded without the need to create a new logical enclosure, provided that the necessary interconnect modules are in place.
NEW QUESTION # 19
Put the steps of the HPE infosight flow in the correct order.
Answer:
Explanation:
Explanation:
(observing, learning, predicting, recommending, acting)
* Observing:The first step involves collecting and monitoring data from the infrastructure. HPE InfoSight continuously gathers telemetry data from various components, including storage, compute, and networking devices.
* Learning:In this step, the collected data is analyzed to identify patterns and trends. Machine learning
* algorithms process the data to understand the normal behavior of the system and detect anomalies.
* Predicting:Based on the learned patterns, HPE InfoSight can predict potential issues before they occur.
This predictive analysis helps in identifying areas that might cause problems in the future.
* Recommending:After predicting potential issues, HPE InfoSight provides actionable recommendations to prevent or resolve these issues. These recommendations are based on best practices and the vast amount of data analyzed by InfoSight.
* Acting:Finally, the recommendations are implemented to optimize the performance and reliability of the infrastructure. This step may involve configuring settings, applying updates, or other actions to maintain the health of the system.
NEW QUESTION # 20
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.
Answer:
Explanation:
Explanation:
The QSFP+ ports (Q1 and Q2) on the HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy can be used to connect satellite modules. These ports are designed to handle high-speed connectivity required for linking additional frames and expanding the Synergy infrastructure.
NEW QUESTION # 21
Drag and Drop Question
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.
Answer:
Explanation:
NEW QUESTION # 22
Your customer uses HPE OneView to manage their HPE Synergy environment.
They plan to use it to manage a new set equipment that includes.
- 20 HPE ProLiant DL365 Gen10 Plus servers
- 20 HPE ProLiant DL380 Gen10 Plus servers
- 5 HPE Primera 650
- 5 HPE MSA 2062 Storage Array
Which statements about now OneView will work with this new equipment are true? (Select two)
- A. HPE Primera 650 can be managed using HPE OneView.
- B. HPE OneView replaces array management tools for both types of array
- C. HPE MSA 2062 Storage Array is not supported in HPE OneView
- D. HPE ProLiant DL380 Gen10 Plus servers have an HPE OneView license included
- E. HPE ProLiant DL365 Gen10 Plus servers are not supported in HPE OneView
Answer: A,C
Explanation:
HPE MSA 2062 Storage Array is not supported in HPE OneView: HPE OneView does not provide management capabilities for the HPE MSA series, which includes the MSA 2062. These arrays must be managed using their dedicated management tools.
HPE Primera 650 can be managed using HPE OneView: HPE OneView supports the management of HPE Primera storage arrays, including the Primera 650, allowing for integrated management and monitoring within the OneView environment.
NEW QUESTION # 23
How will traffic for a given network be affected if the purpose is changed from General to VM Migration?
- A. If VM Migration is selected, all types of traffic other than vMotion will be blocked.
- B. This parameter will allow an administrator to define a VMkernel port.
- C. Changing this parameter does not affect the behavior of the network or traffic.
- D. Changing this parameter to VM Migration will give higher priority for vMotion traffic.
Answer: D
NEW QUESTION # 24
Match each HPE OneView network type with its definition.
Answer:
Explanation:
NEW QUESTION # 25
Hotspot Question
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement.
Answer:
Explanation:
NEW QUESTION # 26
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?
- A. Storage Container
- B. App Volume Set
- C. Virtual Volume Set
- D. virtual Volume
Answer: A
Explanation:
When you configure a vVol datastore using the HPE Storage Integration Pack for VMware vCenter, the storage object to check in SSMC (HPE StoreServ Management Console) is the Storage Container. The Storage Container is a logical storage entity that houses virtual volumes (vVols) and represents the vVol datastore in the storage system. Verifying the Storage Container ensures that the vVol datastore is properly configured and managed.
NEW QUESTION # 27
......
Use Real HPE0-S59 Dumps - 100% Free HPE0-S59 Exam Dumps: https://www.prepawayete.com/HP/HPE0-S59-practice-exam-dumps.html
HPE0-S59 Exam Dumps, Test Engine Practice Test Questions: https://drive.google.com/open?id=1SdP2lBWv_H1v1_MDgvw4ICL_MXXcVuop