Free Salesforce OMS-435 Study Guides Exam Questions and Answer
OMS-435 Exam Dumps, OMS-435 Practice Test Questions
NEW QUESTION # 32
On a FlexCard canvas, several fields display with Salesforce data, but one of the fields shows only the label. What could cause this?
- A. There are No test Data test Parameters configured.
- B. In the Setup Pabel, {recordId} is misspelled in the Data Source Input Map.
- C. In the FlexCard state, the Field type for the field does not match the type in the Salesforce record.
- D. The field name in the FlexCard state does not match the DataRaptor Extract's Output JSON Path name.
Answer: D
NEW QUESTION # 33
An integration procedure contains a Remote Action element that calls a method of an APEX class. The method requires two fields are input: Accountid and ProductId. The integration Procedure data JSON contains the following nodes:
How should the Remote Action element be configured to pass the data correctly to the method?
- A. Add the following to Send JSON Path: accountId: %Accountd% ProductId% Details Products%
- B. Check the DataRaptor Transform checkbox, and add the following Key/Value pairs to Output JSON Path:
- C. Set Return Only Additional Output to true, and add the following Key/Value pairs to additional input.
- D. Check the Send Only Additional Input checkbox, and the following/ value pairs to Additional input:
Answer: C
NEW QUESTION # 34
A developer creates a FlexCard with five state elements. For of the states have a condition. To test the FlexCard, the developer previews it using sample data that causes two of the states to have true conditions.
In this scenario, how will the developer know which state will display?
- A. The first state with true nested condition, regardless of sequence in the FlexCard canvas, will display
- B. The first state with a true AND condition, regardless of sequence in the FlexCard canvas, will display.
- C. The first state with true conditions sequence closest to the top of the FlexCard canvas will display.
- D. The state sequenced first in the FlexCard canvas will display.
Answer: D
NEW QUESTION # 35
A developer has an existing DataRaptor Load that insert Contact records with inputs as LastName and firstName. The DataRaptor works as expected when previewed.
The developer creates an integration Procedure to test the DataRaptor and is using a SetValues element in the Integration Procedure to set the first name and last name for the contact record. The DataRaptor and Integration Procedure are set up as shown in the exhibit below.
When the developer executes the Integration procedure in preview, the following error message displays: Required fields are missing: [last Name]'', How should the developer address this issue?
- A. The Set values Action Keys should include the DataRaptor Post Action element name path, e,g LoadContactDetails, lastname
- B. The DataRaptor Post Action in the integration procedure should have been executed before the Set Values Action
- C. SetValuesContactDetails should have been added to Additional input of DataRaptor Post Action in Integration Procedure
- D. The valid field names should be added in the Domain object field in the DataRaptor
Answer: C
NEW QUESTION # 36
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and males a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. The Typeghead ley is not in the correct format
- B. Use Data JSON is not selected in the properties of the Type Ahead Block.
- C. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
- D. Lookup Mode is not selected in the properties of the Type A Head Block.
Answer: C
NEW QUESTION # 37
A developer is building an OmniScript and needs to retrieve data from a single field in a Salesforce record.
Which OmniScript element does this?
- A. Select
- B. HTTP Action
- C. Lookup
- D. DataRaptor Post Action
Answer: C
NEW QUESTION # 38
A developer is creating an OmniScript that provisions trail orgs to their customers. The following text block in the Omniscript uses a merge code to display the ID for the new trail org:
- A. To %Details: Customer|n: ID%
- B. To %%sDetails: Customer|0: ID%%
- C. To %Details: Customer|1: ID%
- D. To %sDetails: Customer|0: ID$
Answer: C
NEW QUESTION # 39
Refer to the exhibit below. What is the marge code needed for this integration procedure structure to pass a CaseNumber node from the DRReadCase DataRaptor Extract Action to the HTTP Action's HTTP URL?
- A. ((CaseNumber))
- B. ((DRRCase, CaseNumber))
- C. MTTOPDetCaseDetail: CaseNumber%
- D. %DRReadCase: CaseNumber%
Answer: D
NEW QUESTION # 40
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and makes a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. The Typeghead ley is not in the correct format
- B. Use Data JSON is not selected in the properties of the Type Ahead Block.
- C. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
- D. Lookup Mode is not selected in the properties of the Type A Head Block.
Answer: C
NEW QUESTION # 41
A developer is configuring a DataRaptor Load to Save contract dat
a. The developer needs to set the record type of the contact using DeveloperName.
Which two configuration actions should the developer take to set this up in the DataRaptor Load?
- A. Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.
- B. Check is Lookup property when mapping the fields.
- C. Add Link to RecordType object in the Contact Object with the id field of RecordType object.
- D. Select RecordType in the Lookup Object list. ID in the Lookup Field list, and Development in the Lookup requested Field list.
Answer: A,B
NEW QUESTION # 42
Refer to the exhibit below. In this Integration Procedure structure, what Send JSON Path would you use to send the output of the ActionZ element to a Response Action?
- A. ActionZ:BlockY:BlockX
- B. ActionZ:BlockY:BlockX
- C. BlockX.BlockYActionZ
- D. BlockX:BlockY:ActionAZ
Answer: D
NEW QUESTION # 43
A developer creates a new FlexCard to display customer data and actions, such as updating billing information and changing the contact for the customer account. The FlexCard contains 10 fields and 5 actions.
During testing, several fields display with the correct data, but one of the fields shows only the label.
What could cause this?
- A. The field is null 0 the Salesforce record.
- B. The fields have exceeded the maximum number allowed on the card.
- C. {recordld} us misspelled in the Data Source Input Map.
- D. There are no test parameters configured.
Answer: B
NEW QUESTION # 44
Which calculation procedure version in the list would execute on 2/15/2020 at 12:00 PM?
- A. Version Number 4
- B. Version Number 3
- C. Version Number 2
- D. Version Number 1
Answer: C
NEW QUESTION # 45
Refer to the exhibit below. In this Integration Procedure structure, what Send JSON Path would you use to send the output of the ActionZ element to a Response Action?
- A. ActionZ:BlockY:BlockX
- B. ActionZ:BlockY:BlockX
- C. BlockX.BlockYActionZ
- D. BlockX:BlockY:ActionAZ
Answer: D
NEW QUESTION # 46
A developer has a requirement to create a child FlexCard that contains all of its parent FlexCard's records In a Datable How should the developer configure the parent FlexCard's Node?
- A. {Records{0}}
- B. {Recorded}
- C. {Records}
- D. {Params, records}
Answer: D
NEW QUESTION # 47
A customer has a new Engagement Manager who is going to be the new Primary Contact for the Account.
What type of mapping does a DataRaptor Load use to create the new contact and then add it as the new Primary Contact?
- A. Relationship Query
- B. Linked Mapping
- C. Lookup Mapping
- D. Lookup Key
Answer: B
NEW QUESTION # 48
A developer builds a new OmniScript. It contains a Set Values element with a ContextId key/value pair that was used during testing.
What should the developer do before moving the OmniScript to a production org?
- A. Deactivate the contextId key/value pair
- B. Add a Show/Hide condition on the Set Values element.
- C. Delete or Deactivate the Set Values element.
- D. Update the ContextId value to specify an id from the Production org.
Answer: C
NEW QUESTION # 49
A developer is creating an OmniScript that Provisions trial orgs to their customers. The following text block in the OmniScript uses a merge code to display the ID for the new trial org:
Welcome to Salesforce
Your ID is %Details: Customer10:ID%
During testing, the developer notices that the ID does not display. The data JSON is structured as shown below.
How should the developer correct the merge code in order for the ID to display?
- A. To %%Details:Customer|1:ID%
- B. To %%Details:Customer|0:ID%%
- C. To %%Details:Customer|n:ID%
- D. To $Details:Customer|0:ID$
Answer: A
NEW QUESTION # 50
A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with action to close the case and update the case. And it will be styled using the Community's theme.
What must be developer do to configure the FlexCard for deployment in a Community?
- A. Add the FlexCard's API name to FlexCard Player component
- B. Set the Developer property in Card Configuration to ''Community''
- C. Set the Target property in publish Options to Communitypage''
- D. Configure the Component visibility in the custom Component.
Answer: C
NEW QUESTION # 51
A developer creates an OmniScript to update billing information. After analyzing the different types of customer interactions that occur at the company, the developer determines updating billing information should be included in the majority of customer interactions, which are represented by more than 20 different FlexCards.
What is the most efficient way for the developer to configure the action that invokes the OmniScript?
- A. As a Custom Action
- B. As a Lightning Action
- C. As an OS Action
- D. As an OmniStudio Action
Answer: C
NEW QUESTION # 52
A developer is troubleshooting an Integration Procedure with two elements: A Remote Action named FetchCart and a Response Action named ResponseCart.
In Preview, what JSON node shows the data sent to the Response Action?
- A. ResponseCartDebug
- B. Response
- C. FetchCart
- D. ResponseCart
Answer: A
NEW QUESTION # 53
What should a developer's first step be when troubleshooting whether a DataRaptor Extract is retrieving data?
- A. Deactivate the card and layout, and go to the PREVIEW tab for the card to test.
- B. Go to the Lightning Console and reload the page to test.
- C. Go to the PREVIEW tab In OmniScript to test.
- D. Add a key/value pair in the DataRaptor to test it.
Answer: D
NEW QUESTION # 54
A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
- A. The flag passData.JSON in the parent OmniScript in not configured correctly.
- B. Both parent and embedded OmniScripts have the same element name for the Set Values element.
- C. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- D. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
Answer: C
NEW QUESTION # 55
......
Latest OMS-435 Actual Free Exam Questions Updated 85 Questions: https://www.prepawayete.com/Salesforce/OMS-435-practice-exam-dumps.html
Attested OMS-435 Dumps PDF Resource [2023]: https://drive.google.com/open?id=1eAik-KpMv5GFiwTnNi9NTPI3F1PTuAYI