Exam Questions Answers Braindumps CFPE Exam Dumps PDF Questions
Download Free NFPA CFPE Real Exam Questions
NFPA CFPE Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 42
Where would you find information pertaining to the seismic load?
- A. Structural plans
- B. Electrical plans
- C. Fire protection system plans
- D. Mechanical plans
Answer: A
Explanation:
Information pertaining to seismic loads would be found in the structural plans. These plans contain details about the building's framework and its ability to resist seismic forces. The structural plans include calculations and specifications that ensure the building's integrity under seismic stress, following relevant codes such as the International Building Code (IBC) and NFPA 5000.
NEW QUESTION # 43
Exhibit.
On plan A7, what is the corridor floor finish for the first floor plan wing C?
- A. NewVCT
- B. Carpel
- C. Parinted concrete
- D. Ceramic tile
Answer: D
Explanation:
Upon examining Plan A7, it is identified that the corridor floor finish for the first-floor plan wing C is labeled as "Ceramic tile." The NFPA 1031 outlines that the Plan Examiner must confirmthat the materials used in construction meet fire resistance, durability, and safety requirements. Ceramic tile is a preferred choice for its fire-resistant properties and compliance with safety regulations.
NEW QUESTION # 44
Kitchen hood automatic fire-extinguishing systems shall be in accordance with the terms of their listing, the manufacturer's instructions, and which applicable NFPA standard?
- A. NFPA10
- B. NFPA31
- C. NFPA33
- D. NFPA17
Answer: D
Explanation:
NFPA 17, Standard for Dry Chemical Extinguishing Systems, provides the requirements for the design, installation, maintenance, and testing of dry chemical fire-extinguishing systems, including those used in kitchen hood applications. This standard ensures that kitchen hood fire-extinguishing systems operate effectively and in accordance with their intended design and manufacturer instructions.
NEW QUESTION # 45
Exhibit.
According to plan sheet F01, hydraulic calculations must be based on flow criteria obtained by new flow tests conducted by which one of the following?
- A. Sprinkler contractor
- B. Site contractor
- C. Design engineer
- D. Local fire department
Answer: D
Explanation:
Hydraulic calculations for fire protection systems, such as sprinklers, must be based on accurate flow and pressure data. This data is often obtained from flow tests conducted by the local fire department. The fire department has the authority and expertise to perform flow tests on public water supplies, ensuring that the data is reliable and reflects the actual conditions under which the sprinkler system must operate.
NEW QUESTION # 46
What is the maximum distance a fire hydrant may be located from a fire department access road?
- A. 12 ft (3.7m)
- B. 20 ft (6.1 m)
- C. 15 ft (4.6 m)
- D. 10 ft (3.1 m)
Answer: B
Explanation:
According to NFPA 1, Fire Code, fire hydrants should be located within 20 feet (6.1 meters) of a fire department access road. This distance ensures that fire hydrants are easily accessible to firefighters and their equipment during an emergency, facilitating a quick and efficient response. The proximity of hydrants to access roads is critical to the success of fire suppression activities.
Top of Form
Bottom of Form
NEW QUESTION # 47
Exhibit.
All work performed on the sprinkler system described on plan sheet F0.1 shall be in accordance with which NFPA documents'?
- A. NFPA14andNFPA24
- B. NFPA15andNFPA25
- C. NFPA13andNFPA24
- D. NFPA13andNFPA25
Answer: C
Explanation:
NFPA 13, Standard for the Installation of Sprinkler Systems, provides the minimum requirements for the design and installation of sprinkler systems in buildings. NFPA 24, Standard for the Installation of Private Fire Service Mains and Their Appurtenances, addresses the installation of underground fire service mains that supply fire protection systems. Together, these documents provide comprehensive guidance for the installation and maintenance of sprinkler systems as described on plan sheet F0.1.
NEW QUESTION # 48
On plan set A5 what does the number 19 in the box within kindergarten #3 pertain to?
- A. Base
- B. Floor
- C. Callings
- D. Walls
Answer: D
Explanation:
The number "19" in the box within Kindergarten #3 on plan set A5 likely pertains to a specific element in the room's finish schedule, which is usually denoted by a number corresponding to a finish material or treatment.
In architectural plans, such numbers typically refer to walls, ceilings, floors, or base finishes. Based on standard conventions, "19" appears to be associated with "walls," referencing a particular type of wall finish or material specified in the plan's legend.
Top of Form
Bottom of Form
NEW QUESTION # 49
What is the minimum fire flow duration for a 21.000 ft2 (1.950 m2) building of type II (000) construction?
- A. 2 hours
- B. 1 hour
- C. 4 hours
- D. 3 hours
Answer: D
Explanation:
According to NFPA 1, Fire Code, the minimum fire flow duration for a building of 21,000 square feet (1,950 m²) with Type II (000) construction is 3 hours. This duration is based on the fire flow requirements necessary to maintain sufficient water supply for firefighting operations, ensuring the safety of occupants and property.
NEW QUESTION # 50
Draperies and decorations in day care occupancies shall comply with the provisions of which NFPA document?
- A. NFPA 705
- B. NFPA7Q3
- C. NFPA 704
- D. NFPA701
Answer: D
Explanation:
According to NFPA 101, Life Safety Code, draperies, curtains, and other similar furnishings and decorations in day care occupancies must comply with NFPA 701, Standard Methods of Fire Tests for Flame Propagation of Textiles and Films. NFPA 701 provides the test methods to assess the flammability of textiles and films used in various settings, including day care facilities. It ensures that such materials do not contribute to the spread of fire, thereby maintaining a safe environment for occupants.
NEW QUESTION # 51
Exhibit.
On plan sheet P01 fire protection symbols that are square with a solid dot indicate
- A. sprinkler head recessed pendent intermediate temperature quick response
- B. upright open sprinkler head for deluge system
- C. sprinkler head recessed pendent ordinary temperature quick response
- D. sprinkler head upright intermediate temperature quick response
Answer: C
Explanation:
On the plan sheet P01, the fire protection symbols that are square with a solid dot typically represent a recessed pendent sprinkler head designed for ordinary temperature, quick response. This symbol is used in NFPA standards, particularly in NFPA 13, to indicate sprinkler types and their installation characteristics.
Recessed pendent sprinklers are installed to protect against fire hazards from the ceiling downwards, and their quick response mechanism helps to control fires rapidly in occupied spaces.
NEW QUESTION # 52
Exhibit.
The automatic fire sprinkler system remote area located on planF2.0 indicates that the fire sprinkler system has been designed to deliver
- A. 10 gpm ( 38 L/min) over 1 500 tt2 (139 m2)
- B. 20 gpm ( 76 L/mm) over 2 000 tt2 (186 m2)
- C. 15 gpm ( 57 L/min) over 1 500 ft2 (139 m2)
- D. 20 gpm ( 76 L/min) over 1 500 ft2 (139 m2)
Answer: B
Explanation:
In sprinkler design, the "remote area" refers to the section of a building that is most challenging to protect with sprinklers due to its location and characteristics. The design criteria usually specify the minimum density of water (gallons per minute per square foot or liters per minute per square meter) over a specified area that the system must deliver. Based on the standard requirements for typical commercial occupancies, a delivery rate of15 gpm (57 L/min) over 1,500 ft² (139 m²)is common for light to ordinary hazard classifications.
Top of Form
Bottom of Form
NEW QUESTION # 53
Exhibit.
What is the maximum occupant load for Kindergarten classroom 19 on plan A7?
- A. 77 persons
- B. 66 persons
- C. 41 persons
- D. 58 persons
Answer: D
NEW QUESTION # 54
What is the maximum distance a fire department access road can be located from the exterior door of a single family home with an approved automatic sprinkler system?
- A. 150 ft (46 m)
- B. 50 ft (15 m)
- C. 200 ft (61 m)
- D. 100 ft (30 m]
Answer: A
Explanation:
According to NFPA 1, Fire Code, and NFPA 1141, Standard for Fire Protection Infrastructure for Land Development in Wildland, Rural, and Suburban Areas, the maximum distance a fire department access road can be from the exterior door of a single-family home equipped with an approved automatic sprinkler system is typically 150 feet (46 meters). This allows the fire department to access the property effectively while providing some flexibility in site planning and landscaping.
NEW QUESTION # 55
In positive alarm sequence systems trained personnel shall have a maximum of how many seconds during the alarm investigation phase to evaluate the fire condition and reset the system'?
- A. 90 seconds
- B. 180 seconds
- C. 60 seconds
- D. 120 seconds
Answer: D
Explanation:
According to NFPA 72, National Fire Alarm and Signaling Code, in positive alarm sequence systems, trained personnel have a maximum of 120 seconds (2 minutes) during the alarm investigation phase to evaluate the fire condition and reset the system. This time frame is provided to allow personnel to assess whether the alarm is legitimate or false before activating a full evacuation or emergency response.
Top of Form
Bottom of Form
NEW QUESTION # 56
Exhibit.
Using scale C, on the water supply graph 3 found on plan F0.2, what is the residual pressure availableflowing at 1 000 gpm (3,785 Lpm)?
- A. 62 psi (4.2 ban
- B. 75 psi (5.1 bar)
- C. 15 psi (1 bar)
- D. 42 psi (2.9 bar>
Answer: D
Explanation:
To determine the residual pressure available at a flow of 1,000 gpm (3,785 Lpm), locate the 1,000 gpm point on the horizontal axis of the water supply graph and trace vertically to intersect the residual pressure curve.
Then, read the corresponding pressure value on the vertical axis. Based on the exhibit provided, the residual pressure available at 1,000 gpm flow is approximately 42 psi (2.9 bar).
NEW QUESTION # 57
Exhibit.
How many different sprinkler types are shown on plan F0.1?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Based on the symbols and descriptions on plan F0.1, there are 5 different sprinkler types shown. These may include various types such as upright, pendant, sidewall, dry, and recessed sprinklers, each serving different functions and locations within the building. The specific types and their designations are typically detailed in the fire protection legend or key on the plan.
NEW QUESTION # 58
Exhibit.
In the figure what would be the minimum diagonal distance between stairways 1 and 2?
- A. 22 ft 4 in (6.8 m)
- B. 29 ft 2 in (8.9 m)
- C. 43 ft 9 in (13.3 m)
- D. 37 ft 3 in. (11.3m)
Answer: D
Explanation:
To determine the minimum diagonal distance between stairways 1 and 2, we need to calculate the diagonal length of the path between points A and H on the provided floor plan. According to NFPA 1031, Plan Examiners must verify egress routes to ensure compliance with NFPA standards, particularly regarding the minimum distance between exits to ensure that a fire in one location does not cut off access to an alternative exit.
Using the Pythagorean theorem for diagonal distance in a rectangular area, the calculation between stairways A (Stairway 1) and H (Stairway 2) is as follows:
Distance=(Length2+Width2)\text{Distance} = \sqrt{(Length^2 + Width^2)}Distance=(Length2+Width2) Based on the floor plan's measurements, the approximate diagonal distance between stairways is 37 ft 3 in (11.3 m). Therefore, option C is the correct answer.
NEW QUESTION # 59
Which of the following is an architectural drawing that shows the overall project layout of building areas, driveways, fences, fire hydrants, and landscape features?
- A. Construction plan
- B. Plot plan
- C. Site plan
- D. Landscape plan
Answer: C
Explanation:
A "Site Plan" is an architectural drawing that depicts the overall layout of a project, including building footprints, driveways, fences, fire hydrants, landscape features, and other external elements. It provides a comprehensive view of the project's spatial arrangement and its surroundings, which is essential for planning, construction, and emergency response purposes.
NEW QUESTION # 60
Exhibit.
On plan C1 what is the widthof the fire department access driveway on the south facing side of the building wing closes! lo Bedford Street?
- A. 16 ft (4.9 m)
- B. 24 ft (7.3 m)
- C. 18 ft (5.5 m)
- D. 20 ft (6.1 m)
Answer: C
NEW QUESTION # 61
What is the maximum floor area on any one floor permitted to be protected by a single sprinkler system riser for an ordinary hazard occupancy?
- A. 50,000 tt2 (4,645 m2)
- B. 40,000 ft2 (3,716 m2)
- C. 52,000 ft2 (4,831m2)
- D. 25,000 ft2 (2,323 m2)
Answer: B
Explanation:
According to NFPA 13, Standard for the Installation of Sprinkler Systems, the maximum floor area permitted to be protected by a single sprinkler system riser for an ordinary hazard occupancy is 40,000 square feet (3,716 square meters). This limit ensures adequate water delivery pressure and flow to all sprinklers in the covered area.
NEW QUESTION # 62
Exhibit.
Which of the following best describes the location of the manual pull station on plan A12?
- A. On the south wall adjacent to the Ansel agent tank
- B. On the north wall adjacent to the cafeteria exit doorway
- C. On the west wall adjacent to the handwash sink
- D. On the east wad adjacent to the pot sinks
Answer: B
Explanation:
Based on the typical placement conventions for manual pull stations and emergency egress routes, the most effective location for a manual pull station is often near exits to ensure they are easily accessible during an emergency. In this case, the description provided suggests that the manual pull station is located on the north wall adjacent to the cafeteria exit doorway, aligning with these safety principles.
NEW QUESTION # 63
A fire alarm component that only contains indicator lamps, alphanumeric displays, or other equivalent means in which each indication provides status information about a circuit, condition, or location is called
- A. a control panel
- B. an annunciator
- C. a master control unit
- D. a visible textual notification appliance
Answer: B
Explanation:
An annunciator is a fire alarm component that provides visual indicators (such as lamps or alphanumeric displays) to show the status of various circuits, conditions, or locations in a fire alarm system. It helps responders quickly identify the location and nature of the alarm condition without needing to go to the control panel itself.
NEW QUESTION # 64
Exhibit.
What isthe residual pressure according to the water supply graph?
- A. 20 psi(138kPa)
- B. 80 psi(552kPa)
D 120 psi(827kPa) - C. 42 psi (290 kPa)
Answer: C
Explanation:
To determine the residual pressure from the provided water supply graph, locate the appropriate point on the graph where the flow rate intersects with the pressure line. According to the graph, the residual pressure is around 42 psi (290 kPa), which matches option B. This value is determined by reading the vertical axis (pressure) at the point where the flow test results are plotted. The pressure reading corresponds to the data point on the dashed line provided in the water flow test summary sheet.
For detailed calculations, understanding, and verification, reference to NFPA standards, particularly those related to water flow testing, such as NFPA 13 or NFPA 25, would be necessary.
NEW QUESTION # 65
......
Latest NFPA CFPE Real Exam Dumps PDF: https://www.prepawayete.com/NFPA/CFPE-practice-exam-dumps.html
CFPE Exam Dumps, CFPE Practice Test Questions: https://drive.google.com/open?id=1sVjL6YItQzk0GiW7gPnVURMtjWI0WBWk