Dependable 2V0-41.24 Exam Dumps to Become VMware Certified
Get Ready with 2V0-41.24 Exam Dumps (2025)
NEW QUESTION # 28
Which Is the only supported mode In NSX Global Manager when using Federation?
- A. Proxy
- B. Proton
- C. Policy
- D. Controller
Answer: C
Explanation:
NSX Global Manager is a feature of NSX that allows managing multiple NSX domains across different sites or clouds from a single pane of glass. NSX Global Manager supports Federation, which is a capability that enables synchronizing configuration and policy across multiple NSX domains. Federation has many benefits such as simplifying operations, improving resiliency, and enabling disaster recovery.
The only supported mode in NSX Global Manager when using Federation is Policy mode. Policy mode means that NSX Global Manager acts as a policy manager that defines and distributes global policies to local NSX managers in different domains. Policy mode also allows local NSX managers to have their own local policies that can override or merge with global policies.
https://docs.vmware.com/en/VMware-NSX/4.0/administration/GUID-29998FC5-C1AB-40BC-B669-6E8E9937F345.html
NEW QUESTION # 29
Where is the insertion point for East-West network introspection?
- A. Host Physical NIC
- B. Tier-0 router
- C. Guest VM vNIC
- D. Partner SVM
Answer: C
Explanation:
The insertion point for East-West network introspection in NSX is at the Guest VM vNIC (virtual Network Interface Card). By inspecting traffic at the vNIC level, NSX can monitor and apply security policies to traffic between virtual machines (East-West traffic) within the same network segment or data center, providing detailed security controls for VM-to-VM communication.
NEW QUESTION # 30
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
- A. debug
- B. ifconfig
- C. tepconfig
- D. tcpdump
Answer: B
Explanation:
The command ifconfig is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node2. The TEP IP is assigned to a network interface on the bare metal server that is used for overlay traffic. The ifconfig command can show the IP address, netmask, broadcast address, and other information of the network interface. For example, the following command shows the network configuration of the TEP IP on a bare metal transport node with interface name ens192:
ifconfig ens192
The output of the command would look something like this:
ens192: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.10.10.10 netmask
255.255.255.0 broadcast 10.10.10.255 inet6 fe80::250:56ff:fe9a:1b8c prefixlen 64 scopeid 0x20<link> ether 00:50:56:9a:1b:8c txqueuelen 1000 (Ethernet) RX packets 123456 bytes 123456789 (123.4 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 234567 bytes 234567890 (234.5 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 The TEP IP in this example is 10.10.10.10.
Reference: IBM Cloud Docs
NEW QUESTION # 31
Which field in a Tier-1 Gateway Firewall would be used to allow access for a collection of trustworthy web sites?
- A. Source
- B. Profiles -> Context Profiles
- C. Destination
- D. Profiles -> L7 Access Profile
Answer: D
Explanation:
The field in a Tier-1 Gateway Firewall that would be used to allow access for a collection of trustworthy web sites is Profiles -> L7 Access Profile. This field allows the user to create a Layer
7 access profile that defines a list of allowed or blocked URLs based on categories, reputation, or custom entries. The user can then apply the L7 access profile to a firewall rule to control the traffic based on the URL filtering criteria.
NEW QUESTION # 32
Which three security features are dependent on the NSX Application Platform? (Choose three.)
- A. NSX Network Detection and Response
- B. NSX Malware Prevention
- C. NSX TLS Inspection
- D. NSX Intelligence
- E. NSX Firewall
- F. NSX Distributed IDS/IPS
Answer: A,B,D
Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/nsx-application-platform/GUID-
42EDE0AD-CD65-41AC-9694-AD0CCEC35969.html
NEW QUESTION # 33
An administrator is configuring service insertion for Network Introspection.
Which two places can the Network Introspection be configured? (Choose two.)
- A. Partner SVM
- B. Edge Node
- C. Tier-0 gateway
- D. Tier-1 gateway
- E. Host pNIC
Answer: A,E
Explanation:
Network Introspection is a service insertion feature that allows third-party network security services to monitor and analyze the traffic between virtual machines. Network Introspection can be configured on the host pNIC or on the partner SVM, depending on the type of service and the deployment model. The host pNIC configuration is used for services that require traffic redirection from the physical network to the service virtual machine. The partner SVM configuration is used for services that require traffic redirection from the virtual network to the service virtual machine. Network Introspection cannot be configured on the Tier-0 or Tier-1 gateways, as they are not part of the data plane where the service insertion occurs. Network Introspection also cannot be configured on the edge node, as it is a logical construct that hosts the Tier-0 and Tier-1 gateways.
Reference: Distributed Service Insertion, NSX Securing "Anywhere" Part IV
NEW QUESTION # 34
How is the RouterLink port created between a Tier-1 Gateway and Tler-0 Gateway?
- A. Manually create a Segment and connect to both Titrr-1 and Tier-0 Gateways.
- B. Manually create a Logical Switch and connect to bother Tler-1 and Tier-0 Gateways.
- C. Automatically created when Tier-t Is connected with Tier-0 from NSX UI.
- D. Automatically created when Tler-1 is created.
Answer: C
Explanation:
According to the VMware NSX 4.x Professional documents and tutorials, a RouterLink port is a logical port that connects a Tier-1 gateway to a Tier-0 gateway. This port is automatically created when a Tier-1 gateway is associated with a Tier-0 gateway from the NSX UI or API. The RouterLink port enables routing between the two gateways and carries all the routing protocols and traffic. There is no need to manually create a logical switch or segment for this purpose1.
NEW QUESTION # 35
When running nsxcli on an ESXi host, which command will show the Replication mode?
- A. get logical-switch status
- B. get logical-switches
- C. get logical-switch <Local-Switch-UUID> status
- D. get logical-switch <Logical-Switch-UUID>
Answer: B
Explanation:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/c3fd9cef-6b2b-4772-93be-3fe60ce064a1/1f67b9e1-b111-4de7-9ea1-39931d28f560/NSX-T%20Command-Line%20Interface%20Reference.html#get%20logical-switch%20%3Clogical-switch-id%3E
NEW QUESTION # 36
Which two of the following parameters are required for deploying the NSX Application Platform? (Choose two.)
- A. Upload Kubernetes Configuration File
- B. Interface Service Name
- C. Interface Name
- D. Cluster Format Type
- E. Upload XML File
Answer: A,E
Explanation:
Cluster Format Type: This parameter specifies the type of cluster format that will be used for the NSX Application Platform deployment.
Upload Kubernetes Configuration File: NSX Application Platform requires a Kubernetes environment, and the configuration file for Kubernetes must be uploaded to facilitate the deployment.
NEW QUESTION # 37
How does virtual networking enable business to reduce time-to-market?
- A. By performing automatic hardware upgrades
- B. By removing physical network devices
- C. By increasing traffic bandwidth
- D. By providing network services on demand
Answer: D
NEW QUESTION # 38
Which three security features are dependent on the NSX Application Platform? (Choose three.)
- A. NSX Network Detection and Response
- B. NSX Malware Prevention
- C. NSX TLS Inspection
- D. NSX Intelligence
- E. NSX Firewall
- F. NSX Distributed IDS/IPS
Answer: A,B,D
NEW QUESTION # 39
An NSX administrator is creating a Tier-1 Gateway configured In Active-Standby High Availability Mode. In the event of node failure, the failover policy should not allow the original tailed node to become the Active node upon recovery.
Which failover policy meets this requirement?
- A. Preemptive
- B. Disable Preemptive
- C. Non-Preemptive
- D. Enable Preemptive
Answer: C
Explanation:
According to the VMware NSX Documentation, a non-preemptive failover policy means that the original failed node will not become the active node upon recovery, unless the current active node fails again.
This policy can help avoid unnecessary failovers and ensure stability.
The other options are either incorrect or not available for this configuration. Preemptive is the opposite of non-preemptive, meaning that the original failed node will become the active node upon recovery, if it has a higher priority than the current active node. Enable Preemptive and Disable Preemptive are not valid options for the failover policy, as the failover policy is a drop-down menu that only has two choices:
Preemptive and Non-Preemptive.
NEW QUESTION # 40
Which two built-in VMware tools will help identify the cause of packet loss on VLAN Segments?
(Choose two.)
- A. Activity Monitoring
- B. Packet Capture
- C. Live Flow
- D. Traceflow
- E. Flow Monitoring
Answer: B,D
Explanation:
Traceflow: This tool helps in troubleshooting network issues by injecting synthetic packets into the network and observing their path. It allows administrators to trace the packet flow across various network segments, making it easier to identify points of packet loss.
Packet Capture: This tool enables detailed inspection of traffic by capturing packets at specific points in the network. It allows administrators to analyze packet headers and payloads to determine if packet loss is occurring and to identify possible causes.
NEW QUESTION # 41
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
- A. debug
- B. ifconfig
- C. tcpconfig
- D. tcpdump
Answer: B
Explanation:
The ifconfig command is used to display the network configuration of interfaces, including the Tunnel Endpoint (TEP) IP on a bare metal transport node. This command provides details about IP addresses, subnet masks, and other network settings for each interface on the node.
NEW QUESTION # 42
Which field in a Tier-1 Gateway Firewall would be used to allow access for a collection of trustworthy web sites?
- A. Source
- B. Profiles -> Context Profiles
- C. Destination
- D. Profiles -> L7 Access Profile
Answer: D
Explanation:
The field in a Tier-1 Gateway Firewall that would be used to allow access for a collection of trustworthy web sites is Profiles -> L7 Access Profile. This field allows the user to create a Layer 7 access profile that defines a list of allowed or blocked URLs based on categories, reputation, or custom entries1. The user can then apply the L7 access profile to a firewall rule to control the traffic based on the URL filtering criteria1. The other options are incorrect because they are not related to URL filtering. The Source field specifies the source IP address or group of the firewall rule1. The Destination field specifies the destination IP address or group of the firewall rule1. The Profiles -> Context Profiles field allows the user to create a context profile that defines a list of application signatures or attributes that can be used to identify and classify network traffic1.
Reference: Gateway Firewall
NEW QUESTION # 43
Refer to the exhibit. An administrator would like to change the private IP address of the NAT VM
172.16.101.11 to a public address of 80.80.80.1 as the packets leave the NAT-Segment network.
Which type of NAT solution should be implemented to achieve this?
- A. NAT64
- B. Reflexive NAT
- C. SNAT
- D. DNAT
Answer: C
Explanation:
Source NAT (SNAT) is used to translate the private IP address (172.16.101.11) of the NAT VM to a public IP address (80.80.80.1) as the packets leave the NAT-Segment network. SNAT changes the source IP of outbound packets, allowing private IP addresses within the internal network to be mapped to public IP addresses for communication with external networks.
NEW QUESTION # 44
Which CLI command would an administrator use to allow syslog on an ESXi transport node when using the esxcli utility?
- A. esxcli network firewall ruleset set -r syslog -e true
- B. esxcli network firewall ruleset -e syslog
- C. esxcli network firewall ruleset set -r syslog -e false
- D. esxcli network firewall ruleset set -a -e false
Answer: A
Explanation:
The esxcli network firewall ruleset set -r syslog -e true command is used to enable the firewall ruleset for syslog on an ESXi host. Setting the -e flag to true allows syslog traffic through the ESXi firewall, enabling remote logging for syslog messages from the transport node.
NEW QUESTION # 45
When running nsxcli on an ESXi host, which command will show the Replication mode?
- A. get logical-switch status
- B. get logical-switches
- C. get logical-switch <Local-Switch-UUID> status
- D. get logical-switch <Logical-Switch-UUID>
Answer: B
NEW QUESTION # 46
The security administrator turns on logging for a firewall rule.
Where is the log stored on an ESXi transport node?
- A. /var/log/messages.log
- B. /var/log/fw.log
- C. /var/log/vmware/nsx/firewall.log
- D. /var/log/dfwpktlogs.log
Answer: D
Explanation:
The log for a firewall rule on an ESXi transport node is stored in the /var/log/dfwpktlogs.log file. This file contains information about the packets that match or do not match the firewall rules, such as the source and destination IP addresses, ports, protocols, actions, and rule IDs. The log file can be viewed using the esxcli network firewall get command or the vSphere Client.
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/administration/GUID-D57429A1-A0A9-
42BE-A299-0C3C3546ABF3.html
NEW QUESTION # 47
An administrator needs to encrypt file transfers between two sites that do not have the same subnet. Which NSX-T feature accomplishes this task?
- A. L2 VPN
- B. IPSEC VPN
- C. SSL VPN +
- D. Tier-0 Gateway
Answer: B
NEW QUESTION # 48
How is the RouterLink port created between a Tier-1 Gateway and Tier-O Gateway?
- A. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
- B. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.
- C. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
- D. Automatically created when Tier-1 is created.
Answer: B
Explanation:
The RouterLink port is automatically created when a Tier-1 Gateway is connected with a Tier-0 Gateway from the NSX UI1. The RouterLink port is a logical interface that is assigned an IP address and is associated with a physical or virtual interface. The RouterLink port acts as an end point of the IPSec tunnel and routes traffic between the Tier-1 Gateway and the Tier-0 Gateway2. The other options are incorrect because they involve manual creation of logical switches or segments, which are not required for RouterLink port creation.
Reference: Configure NSX for Virtual Networking from vSphere Client, Virtual Private Network (VPN)
https://docs.vmware.com/jp/VMware-NSX/4.0/administration/GUID-3F163DEE-1EE6-4D80-BEBF-
8D109FDB577C.html
NEW QUESTION # 49
An NSX administrator is creating a Tier-1 Gateway configured in Active-Standby High Availability Mode. In the event of node failure, the failover policy should not allow the original failed node to become the Active node upon recovery.
Which failover policy meets this requirement?
- A. Preemptive
- B. Disable Preemptive
- C. Non-Preemptive
- D. Enable Preemptive
Answer: C
Explanation:
In Non-Preemptive failover policy, once a failover occurs and a new Active node is designated, the original failed node will not automatically become the Active node upon recovery. This setting ensures that the failover does not revert to the original node after it comes back online, maintaining the stability of the network by keeping the current Active node as is.
NEW QUESTION # 50
In an NSX environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers.
Which two actions could address low throughput and congestion? (Choose two.)
- A. Deploy Large size Edge node/s.
- B. Configure NAT on the Tier-0 gateway.
- C. Configure ECMP on the Tier-0 gateway.
- D. Add an additional vNIC to the NSX Edge node.
- E. Configure a Tier-1 gateway and connect it directly to the physical routers.
Answer: A,C
Explanation:
Configure ECMP on the Tier-0 gateway: ECMP (Equal-Cost Multi-Path) allows multiple paths for traffic between the Tier-0 Gateway and the upstream physical routers, effectively distributing the traffic load and improving throughput. By enabling ECMP, you can reduce congestion and increase bandwidth utilization, thus addressing performance issues.
Deploy Large size Edge node/s: Deploying larger Edge nodes can provide more resources (CPU, memory, and network interfaces) to handle higher throughput and reduce congestion. This is especially important if the existing Edge node is overwhelmed by the amount of traffic.
NEW QUESTION # 51
Which two statements describe the characteristics of an Edge Cluster in NSX? (Choose two.)
- A. Must have only active-active edge nodes
- B. Can contain multiple types of edge nodes (VM or bare metal)
- C. Can have a maximum of 8 edge nodes
- D. Can have a maximum of 10 edge nodes
- E. Must contain only one type of edge nodes (VM or bare metal)
Answer: B,D
Explanation:
Reference:
https://configmax.vmware.com/guest?vmwareproduct=NSX-T%20Data%20Center&release=NSX- T%20Data%20Center%203.0.0&categories=17-0
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-14183A62-8E8D-43CC-
92E0-E8D72E198D5A.html
NEW QUESTION # 52
Where does an administrator configure the VLANs used in VRF Lite? (Choose two.)
- A. uplink trunk segment
- B. uplink interface of the VRF gateway
- C. segment connected to the Tier-1 gateway
- D. uplink interface of the default Tier-0 gateway
Answer: B,C
Explanation:
The VLANs used in VRF Lite are configured on the uplink interface of the VRF gateway, which enables traffic segmentation and routing within the VRF context.
The uplink trunk segment is where multiple VLANs can be configured and tagged, allowing them to be used by the VRF Lite setup for routing and segmentation across the network.
NEW QUESTION # 53
......
VMware 2V0-41.24 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
Download Exam 2V0-41.24 Practice Test Questions with 100% Verified Answers: https://www.prepawayete.com/VMware/2V0-41.24-practice-exam-dumps.html
Realistic 2V0-41.24 Dumps are Available for Instant Access: https://drive.google.com/open?id=1--mPoRXEPDzscohgHaGRVfbB30aXy_fk