[Dec-2021] Use Real 350-601 Dumps Free Sample Questions and Practice Test Engine [Q56-Q71]

Share

[Dec-2021] Use Real 350-601 Dumps Free Sample Questions and Practice Test Engine

Pass Cisco 350-601 exam - questions - convert Tets Engine to PDF


Cisco DCCOR 350-601 Practice Test Questions, Cisco DCCOR 350-601 Exam Practice Test Questions

Successfully completing the Cisco 350-601 DCCOR: Implementing Cisco Data Center Core Technologies exam makes you eligible for the following certifications: CCIE Data Center, CCNP Data Center, and Cisco Certified Specialist – Data Center Core.


Concluding Thoughts

A look at the latest IT trends shows that data centers are fast gaining popularity. Reputable companies are now hiring competent individuals to supervise the associated processes. That list includes data center project managers, data center engineers, compliance officers, and cybersecurity specialists just to mention a few. If you are looking for one of the easiest ways to keep pace with the latest trends, the new Cisco 350-601 exam is the way to go. This is the perfect time to capitalize on those opportunities!

 

NEW QUESTION 56
What is a benefit of using the Cisco UCS Lightweight upgrade feature?

  • A. The firmware version of a component is updated only when it has been modified
  • B. A soft reboot is available for the fabric interconnects.
  • C. All servers are rebooted to push the latest updates.
  • D. Security updates are scheduled with the next reboot of the fabric interconnects.

Answer: A

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-central/GUI-User-Guides/Administration/2-0

 

NEW QUESTION 57
Refer to the exhibit.

An engineer configures FCIP on a Cisco MDS 9000 Series switch. What is the result of implementing the configuration?

  • A. Mode2 is enabled by default.
  • B. Compression is performed by using software.
  • C. Compression is performed by using hardware
  • D. The switch attempts to make two TCP connections

Answer: C

 

NEW QUESTION 58
A network engineer is adding a Cisco HyperFlex data platform to the Cisco intersight management portal.
Which two components are required for Intersight to claim the Cisco HyperFlex data platform? (Choose two.)

  • A. device FQDN
  • B. device claim code
  • C. device ID
  • D. device public IP address
  • E. device serial number

Answer: A,D

 

NEW QUESTION 59
Which statement about the MAC address that the FCoE Initialization Protocol chooses for use by an E-Node in an FCoE implementation is true?

  • A. FCoE does not use a MAC address. The FCoE Initialization Protocol is used to acquire a Fibre Channel ID, and the address is used for all FCoE communications in the same way as Fibre Channel Protocol.
  • B. The FCoE Initialization protocol uses a 24-bit FC-MAP and concatenates a 24-bit Fibre Channel ID to create a fibric-provided MAC address.
  • C. The FCoE Initialization Protocol uses 01.00.0C as the first 24 bits of the MAC address and appends a
    24-bit Fibre Channel ID to derive a full 48-bit FCoE MAC address.
  • D. The FCoE Initialization Protocol uses the burned-in MAC address of the converged network adapter for all FCoE operations.

Answer: B

 

NEW QUESTION 60
A UCS B-Series server located in B5108 chassis 1 slot 1 is currently unavailable. The server needs to be associated with a specific service profile when it becomes available. Which associate service profile option should be selected to accomplish this goal?

  • A. server
  • B. custom server
  • C. server pool
  • D. restrict migration

Answer: A

Explanation:
Section: Compute

 

NEW QUESTION 61
A company is investigating different options for IT automation tools. The IT team has experience with python programming language and scripting using a declarative language. The proposed tool should be easy to set up and should not require installing an agent on target devices. The team will also need to build custom modules based on the python programming language to extend the tools functionality. Which automation tool should be used to meet these requirements?

  • A. Puppet
  • B. Chef
  • C. Ansible
  • D. NX-API

Answer: A

 

NEW QUESTION 62
A network engineer must configure a Cisco MDS switch to use the local user database for console access if all AAA servers are unreachable. Which configuration should be applied to complete this task?

  • A. aaa authentication login default fallback error local
  • B. aaa authentication login default local
  • C. aaa authentication login console fallback error local
  • D. aaa authentication login console local

Answer: C

 

NEW QUESTION 63
An engineer must configure Cisco IMC server management NIC for autonegotiation. Which setting should be selected?

  • A. dedicated
  • B. shared LOM
  • C. Cisco card
  • D. shared LOM EXT

Answer: A

 

NEW QUESTION 64
An engineer is implementing security on the Cisco MDS 9000 switch. Drag drop the descriptions from the left onto the correct security features on the right.

Answer:

Explanation:

Explanation
prevent unauthorized - fabric binding.
Uses the exchange fabric membership- fabric binding
Can be distributed - port security
Allows a preconfigured - port security

 

NEW QUESTION 65
An engineer must configure RBAC is Cisco UCS Manager in an existing data center environment. Which two roles can be used to configure LAN Connectivity policies? (Choose two.)

  • A. server-profile
  • B. operations
  • C. enable
  • D. admin
  • E. network-admin

Answer: D,E

 

NEW QUESTION 66
Refer to the exhibit.

The STP priority of N7K-1 and N7K-2 are the lowest in the network. Which statement describes STP on the vPC?

  • A. N7K-1 and N7K-2 appear as a single STP root.
  • B. N7K-1 preempts N7K-2 as the STP root.
  • C. N7K-1 appears as the STP root.
  • D. N7K-2 appears as the STP root.

Answer: A

 

NEW QUESTION 67
Refer to the exhibit.

Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)

  • A. board controller
  • B. IOMs
  • C. BIOS
  • D. Cisco UCS Manager
  • E. adapters

Answer: A,C

 

NEW QUESTION 68
Drag and drop the characteristics from the left onto the correct storage systems on the right.

Answer:

Explanation:

Explanation

2,4,5 - NAS 1,3 - SAN

 

NEW QUESTION 69

Refer to the exhibit. What is the result of executing this python code?

  • A. It backs up Cisco switches to Cisco Prime infrastructure.
  • B. It sends a Cisco device backup to a remote destination.
  • C. It sends the switch configuration to Cisco TAC.
  • D. It schedules a backup on a Cisco switch using EEM.

Answer: B

 

NEW QUESTION 70

Refer to the exhibit. An engineer must monitor ingress traffic from SW1 and SW2 port-channel interfaces from SW3. Which configuration must be implemented to accomplish this goal?
A)

B)

C)

D)

  • A. Option A
  • B. Option C
  • C. Option B
  • D. Option D

Answer: D

 

NEW QUESTION 71
......


Skills Outline of Cisco 350-601 Exam

The Cisco 350-601 exam is presented to the candidates in a wide range of topics, which indicate the skills measured. Here they are:

  • Network (25%)

    To answer the questions from this first topic, the test takers need to demonstrate that they have the skills and knowledge required to apply routing protocols (FHRP, PIM, MP-BGP, OSPFv2, OSPFv3), implement network configuration management, and implement infrastructure monitoring such as SPAN and NetFlow. This domain also comprises of skills such as describing software updates and their impacts, which means that the students should understand fabric setup, VMM, tenant policies, and access policies. Also, they will be required to answer the questions related to analyzing Cloud deployment and service models, analyzing packet flow (broadcast, multicast, and unicast), applying overlay protocols such as OTV and VXLAN EVPN, and applying switching protocols, for example, vPC, LACP, and RSTP+.

  • Security (15%)

    In the last section, the examinees need to demonstrate their expertise in applying network security, including CoPP, ACI contracts, and micro-segmentation, AAA and RBAC, and first-hope security features, such as port security, DHCP snooping, and dynamic ARP inspection. In addition, the candidates will need to show that they can apply to compute security effectively. Last but not least, they will have to answer the questions related to the application of storage security in reference to AAA and RBAC, fabric binding, and port security.

  • Compute (25%)

    Answering the questions from this objective, the applicants have to show that they have the capability to implement Cisco Unified Compute System Rack Servers, implement infrastructure monitoring such as Intersight and SPAN, implement compute management configuration (restore and backup), describe software and firmware updates and their effects on C-Series and B-Series servers, and explain HyperFlex Infrastructure with its benefits (all-flash vs Edge and Hybrid Architecture). Besides, within this knowledge area, the learners’ ability to implement Cisco Compute System Blade Chassis is tested. This means that the students must have the skills needed to accomplish initial setup and infrastructure management. They should also demonstrate their knowledge of server management, storage management, and network management (pools and policies, VLANs, templates, QoS).

  • Storage Network (20%)

    This subject area evaluates the candidates’ proficiency in describing software updates as well as their impacts (EPLD and disruptive/nondisruptive), implementing infrastructure monitoring, describing the NAS and NFS concepts, and implementing FCoE Unified Fabric (DCB and FIP). This topic also encompasses their proficiency in implementing Fiber Chanel. This means that the applicants must have a thorough understanding of zoning, VSAN, NPV and NPIV, device alias, FCNS, CFS, FCID, port channels, and switch fabric initialization.

  • Automation (15%)

    In the framework of this topic, the individuals need to show their competency in implementing automation and scripting tools, including REST API, EEM, Scheduler, Guest Shell and Bash Shell for NX-OS, and JSON and XML encodings. Answering the questions within this domain, they also need to be able to evaluate automation as well as orchestration technologies. This means that they should be well conversant with UCSD, DCNM, POAD, PowerShell, Python, Ansible, and Puppet.

 

Pass Your 350-601 Exam Easily - Real 350-601 Practice Dump Updated Dec 14, 2021: https://www.prepawayete.com/Cisco/350-601-practice-exam-dumps.html

2021 Realistic Verified Free Cisco 350-601 Exam Questions : https://drive.google.com/open?id=1i7L7sZPbL2pY9v3Lz8_7OK7Hyh4jvpFj 

Contact Us

If you have any question please leave me your email address, we will reply and send email to you in 12 hours.

Our Working Time: ( GMT 0:00-15:00 )
From Monday to Saturday

Support: Contact now